Wage: £12,480 for your first year, then could increase depending on your age
Training course: Engineering technician (level 3)
Hours: Monday – Friday (hours to be confirmed).
Start date: Monday 7 September 2026
Duration: 3 years 6 months
Positions available: 1

Summary

An exciting opportunity to train as an automatic door technician within a growing specialist engineering business. The apprentice will gain hands on experience installing, servicing and maintaining automatic doors systems across commercial environments.

Wage £12,480 for your first year, then could increase depending on your age National Minimum Wage rate for apprentices Minimum wage rates (opens in new tab) Wage progression will be reviewed annually based on performance and development. Training course Engineering technician (level 3) Hours Monday – Friday (hours to be confirmed). Frequent early start/late finish depending on site requirements. 30 hours a week Start date Monday 7 September 2026 Duration 3 years 6 months Positions available 1

What you'll do at work

Assisting with the installation of automatic sliding and swing door systems Supporting planned preventative maintenance visits Learning fault-finding techniques on operators, sensors and control panels Carrying out mechanical assembly and adjustments Assisting with safe electrical connections within automatic door systems Completing service documentation and safety compliance checks (BS EN 16005) Working across commercial, retail and care environmentsTravelling to various client sites as part of the role

Where you'll work

Shields RdSunderlandSR6 8JN

Training

Apprenticeships include time away from working for specialist training. You’ll study to gain professional knowledge and skills.

What you'll learn

Course contents obtaining, checking and using the appropriate documentation (such as job instructions, drawings, quality control documentation)working safely at all times, complying with health, safety and environmental legislation, regulations and organisational requirements planning and where applicable obtaining all the resources required to undertake the work activityundertaking the work activity using the correct processes, procedures and equipmentcarrying out the required checks (such as quality, compliance or testing) using the correct procedures, processes and/or equipmentdealing promptly and effectively with engineering/manufacturing problems within the limits of their responsibility using approved diagnostic methods and techniques and report those which cannot be resolved to the appropriate personnelcompleting any required documentation using the defined recording systems at the appropriate stages of the work activityrestoring the work area on completion of the activity and where applicable return any resources and consumables to the appropriate locationread and interpret relevant data and documentation used to manufacture aerospace components/systemsassemble and disassemble aerospace mechanical components, sub-assemblies and whole systems (new and in service) as required measure and mark out of materials to carry out precision machining and hand fitting processesprecision drilling and finishing of holes in aircraft assemblies use mechanical and or electrical/electronic measuring and or test equipment used on aircraft assemblies and systemsapply assembly techniques (such as mechanical fasteners, welding and bonding techniques)use sealing and jointing techniques: use of seals, gaskets, and jointing materials contribute to the business by identifying possible opportunities for improving working practices, processes and/or proceduresassemble, disassemble and install aerospace components, sub-assemblies and whole systems (new and in service) as required such as wiring looms, anti-icing systems, electrical connectors, avionic units and using specified methods and proceduresset up and use a range of measuring, testing, diagnostic tools, rigs and equipment, using approved methods and procedures install lighting, power supplies, engine control and instrumentation systemscarry out testing and diagnostic activities on installed components, equipment and systems and making adjustment/rectification where applicablecarry out precision drilling and finishing of holes in aerospace assemblies apply correct locking and securing methods and techniques (mechanical fasteners, locking and electrical bonding techniques)use sealing and jointing techniques: use of seals, gaskets, and jointing materials install and connect pipe-work systems and aerospace assembliescontribute to the business by identifying possible opportunities for improving working practices, processes and/or proceduresread and interpret relevant data and documentation used to maintain aircraft components and systemsselect and use the correct hand and mechanical tools and equipment while carrying out maintenance of aircraft apply human factors in aviation – attitudes and behaviours to ensure aviation safetyuse mechanical and electrical measuring and or test equipment while carrying out aircraft maintenance activitiescarry out aircraft functional checks and fault diagnosis e.g. electrical bonding and earthing; flight control rigginguse ground support equipmentidentify, control, repair and prevent damage, fatigue and corrosion of aircraft componentsmaintain power-plant (piston or turbine engines), propellers or rotorsuse the correct bonding and assembly techniques e.g. in composite assemblycarry out precision drilling and finishing of holes in aircraft assembliesidentify and install mechanical fastenersuse sealing and jointing techniques: use of seals, gaskets and jointing techniquesassemble, repair and replace pipe work for aircraft and engine systemsinspect, repair, remove and replace aircraft structures, components, sub-assemblies and systemsundertake aircraft flight-line handling and operationscarry out testing and diagnostic activities on components, sub – assemblies or whole systems, making adjustments/rectifications where applicablemaintain aerospace components, sub – assemblies or whole systems as required undertake aircraft role configuration activities/requirementsprepare and maintain the aircraft maintenance programmeapply Human Factors in aviation – developing attitudes and behaviours to ensure aviation safetymaintain relationships between the aircraft operator and the aircraft maintenance organisation recognising the regulatory responsibilities of both partiesuse relevant computer software, information systems and documentation necessary to carry out the roleuse asset and inventory management systems within a continuing airworthiness environmentSeveral options are available through the apprenticeship depending on the context of the organisation, whether in civil or military aviation, rotary or fixed wing aircraft, in continuing airworthiness management or aircraft maintenance and repair organisations.apply the principles and methods used to implement aviation safety management systemsapply reliability monitoring and analysis of aircraft and their systemsapply compliance monitoring and quality auditing of the organisation and aircraft work with other personnel internal and external to the organisation, providing good customer serviceapply fleet planning, maintenance scheduling and aircraft on the ground (AOG) requirementsread, analyse and interpret engineering data, drawings and documentation used in the design, build, operation and repair of maritime vesselsuse hand, power and machine tools to measure, mark out, cut, drill, shape and finish components to the required engineering tolerances.assemble, remove, maintain and overhaul components, sub-assemblies and whole systems in a maritime environment.apply assembly and installation methods and techniques (such as terminations, connectors, mechanical fasteners, seals, gaskets, and jointing materials) on maritime vessels.undertake testing, inspection and diagnostic activities on components, equipment and systems on maritime vessels, making adjustments where applicable.measure and mark out to carry out precision machining and hand fitting processes use hand tools to cut, drill, shape and finish components to the required engineering tolerances.assemble, remove and overhaul components, sub-assemblies and whole systems in a maritime environmentapply assembly and installation methods and techniques (such as mechanical fasteners, use of seals, gaskets, and jointing materials) on board ships and submarines.undertake the testing, inspection and diagnostic activities on components, equipment and systems on board ships and submarines and making adjustments where applicable.undertake planned and corrective maintenance activities on components, equipment and systems.use hand and mechanical tools, jigs and test equipment safely in the Maritime Industry.read, analyse and interpret engineering data, drawings and documentation used in the design, build, operation and repair of maritime vessels.carry out fabrication and construction processes through precision measuring and marking out.use hand tools / machinery to cut, drill, shape and finish components to the required engineering tolerances.assemble, remove and overhaul components in a maritime environment.apply assembly and installation methods and techniques (such as mechanical fasteners, use of seals, gaskets, and jointing materials) on maritime vessels.undertake planned and corrective repair activities on structures, components and equipment.measure and mark out to enable the fabrication of pipework using a variety of materials (ferrous, non-ferrous and non-metallic) and processes (to include taking wire templates and jigs, setting to boards etc).wire templates and jigs, setting to boards etc).use hand and machine tools to cut, drill, shape and finish components to the required engineering tolerances.fabricate, install and repair pipe systems in a maritime environment.apply assembly and installation techniques (such as brazing, welding, mechanical fasteners, seals, gaskets, jointing materials and methods) on Maritime vessels.undertake testing, inspection and diagnostic activities on pipework systems on maritime vessels, making adjustments where applicable.undertake planned, corrective maintenance and survey activities on pipework components and systems.select and set up the correct tooling and work holding devicesselect and use a range of measuring and testing equipment to check components are to the required quality and accuracyread and interpret relevant data and documentation used to maintain components, equipment and systemscarry out condition monitoring of plant and equipmentcarry out planned maintenance activities on plant and equipmentcarrying out complex fault diagnosis and repair activities on high technology engineered systems such as: Maintaining mechanical equipment, Maintaining fluid & pneumatic power equipment, Maintaining electrical & electronic equipment, Maintaining process control equipmentcarrying out confirmation testing and subsequent smooth hand over of equipment & plant support the installation, testing and commissioning of equipment (where applicable).read and interpret relevant data and documentation used in the design and development of components, assemblies and systemsproduce components and prototypes using a wide range of hand fitting techniquesprepare and using lathes, milling machines, as well as other general or specialist high technology equipment such as 3D printing/additive manufacturing techniquesuse a range of mechanical, electrical and electronic testing devices and equipmentapply mechanical principles and joining techniques to develop products, devices and equipmentapply electrical and electronic principles to develop products devices and equipmentidentify, diagnose and rectify design problems through the whole creation process including design studio, workshops, test environments or under laboratory conditionsread and interpret relevant data and documentation used to produce and/or maintain tool and die components, assemblies and systemsapply methods and techniques to produce, assemble, disassemble repair and/or maintain tools, dies, jigs and fixtures as applicable to the employer requirementsundertake testing to confirm correct operation, and of the effectiveness of repairs and maintenance activities carried out.undertake equipment/asset care and/or Preventative Planned Maintenance processes and proceduresCarry out complex fault diagnosis and repair activities covering the following technologies as applicable to the tool, die, jig and fixture environment: Maintaining mechanical equipment, Maintaining fluid & pneumatic power equipment, Maintaining electrical & electronic equipment, Maintaining process control equipmentproduce technical documentation that contains all the relevant and necessary data and information required for the technical support activity being carried outpresent the technical documentation in the required format ensure that codes, symbols and other references used in the technical documentation follows agreed uk/international conventionssave and store technical documentation in the correct format, location in accordance with organisational and/or customer requirementsmake any changes/amendments to the technical documentation using agreed qualityassurance control proceduresdevelop effective business and/or customer relationshipsprovide technical advice and guidance to othersproduce engineering/manufacturing production plansobtain resources for engineering/manufacturing activitiesprovide technical support services on products or services to internal and/or external customersobtain and control materials used in engineering/manufacturing environments implement quality control/assurance systems and procedures in an engineering/manufacturing environmentproduce documentation to supply or procure goods or servicesproduce off line programs for computer numerical controlled machinesproduce programs for scanning/digitizing or co-ordinate measuring machinesproduce programs for programmable logic control equipmentproduce programs for industrial robot applicationsproduce engineering software tools/programs for analysis, quality, configuration management, safety assessments, system security applicationsproduce engineering drawings/models using computer aided design techniques (such as mechanical, electrical, fabrication, fluid power, integrated systems or services)undertake complex fault diagnostic and/or condition monitoring activities on equipment, plant or servicescarry out inspection activities on equipment/components/systems (such as mechanical, electrical, electronic, welded and fabricated.check and calibrate control and test equipment used in an engineering and/or manufacturing environment

Training schedule

Training format:

Day release at Sunderland College On-the-job training across live commercial sites Structured mentoring by the business owner

Training will take place at:

Sunderland College campus (to be confirmed by the provider) Employer and client sites across multiple regions

Essential qualifications

GCSE in:

English (grade 4-9)Maths (grade 4-9)

Share if you have other relevant qualifications and industry experience. The apprenticeship can be adjusted to reflect what you already know.

Skills

Communication skillsAttention to detailOrganisation skillsCustomer care skillsProblem solving skillsNumber skillsAnalytical skillsLogicalTeam workingCreativeInitiativeNon judgementalPatiencePhysical fitness

About this employer

N E Automatics is a specialist automatic door engineering business providing installation, servicing and repair services to commercial clients. The company works across retail, care and commercial environments and is committed to delivering high standards of safety and compliance.

After this apprenticeship

Your earnings can increase over time with an apprenticeship. Find out about potential future pay (opens in new tab).

Successful completion may lead to:

Full-time permanent Automatic Door Technician role Industry-specific safety training and certifications Increased responsibility and independent site work

Apprentice Technician

About this role

Similar jobs you might like

Apprentice Automatic Door Technician

Order Picker and Packer Operatives

Warehouse Person